GRIDLOK Attachment Technology
Written by Beez
December 29, 2020 – 10:25 pm

Comments Off on GRIDLOK Attachment Technology

Attachment technology for load bearing essentials has been around for decades however, in the recent few years some of the most impressive advances have been witnessed regarding the evolution of attachment technology. For example, ALICE clips were experimented with during the Vietnam War and it wasn’t until 1974 that the United States Army and the United States Marine Corps actually adopted ALICE attachment technology as standard issue load bearing essentials for their soldiers and marines. ALICE clip attachment technology remained the norm for several decades until the attachment technology was forced to evolve in order to meet the requirements of the modern warfare fighter while on the battlefield.


A more flexible material became mass produced as well as polymer infused, polymer injected and polymer molded options became available focused around a weaving process to help reduce the wiggle experienced while in motion. Although convenient for the operator many of these options are manufactured using harmful chemicals that have actually been recognized to cause cancer by the state of California. Attaching load bearing essentials utilizing a weaving process was such a significant advancement in the evolution of attachment technology that it has become the new standard for all tactical gear manufacturers.


Many tactical gear manufacturers focus their load bearing attachment technology around polymer applications. Although this option does offer a rugged and rigid attachment it can create difficulty for the operator if having to remove pouches and reattach them to other equipment while in a hurry. Not to mention it is well known that while under battlefield conditions any additional weight can soon become overwhelming. Many of these load bearing polymer attachment options are heavy and the ounces they weigh can eventually feel like pounds over time while in the field.


Recognizing these issues and the demands of warfare fighters while under these conditions, Beez Combat Systems has designed a laser cut, lightweight more durable option for attaching essential load bearing items to tactical gear such as plate carriers, combat belts and chest rigs. GRIDLOK attachment technology is now available with any Beez Combat Systems GRIDLOK Pouch utilizing the most advanced laser cutting technology accessible to tactical gear manufacturers. GRIDLOK attachment technology is lightweight in that it is laser cut directly from the same material at the same time as the pouch itself. GRIDLOK attachment technology is also more durable in that GRIDLOK does not need reinforced stitching resulting in additional material and increased weight. The final greatest benefit and feature of GRIDLOK attachment technology is that the laser cut technology actually eliminates ‘pouch slouch’ ensuring the operator more efficient transitions and accessibility to load bearing essentials.

 

APTUM™ Swimmer Plate Carrier
Written by Beez
December 18, 2020 – 9:17 pm

Comments Off on APTUM™ Swimmer Plate Carrier

The Beez Combat Systems APTUM™ Swimmer Plate Carrier was designed as an adaptable plate carrier for multi-faceted operations for military, law enforcement and the responsible citizen. The Beez Combat Systems APTUM™ Swimmer Plate Carrier is a highly scalable piece of equipment that can be configured to operate in low visibility operations as well as high threat level operations. The front panel design of the APTUM™ Swimmer Plate Carrier emphasizes comms/data attachment points as well as cable management. This allows the wearer to attach the necessary equipment for the mission at hand as well as equip important mission data commonly utilized among Juggernaut™, THYRM and Kagwerks cases. 
The Beez Combat Systems APTUM™ Swimmer Plate Carrier OVERT Back Plate Bag was designed to allow the wearer additional real estate space for extended multi-faceted operations. The APTUM™ Swimmer Plate Carrier OVERT Back Plate Bag includes laser cut GRID allowing the wearer to attach necessary items such as communications related equipment, hydration packs and other pouches such as the Beez Combat Systems GRIDLOK IFAK Pouch or the GRIDLOK Dump Pouch.


The APTUM™ Swimmer Plate Carrier by Beez Combat Systems is entirely laser cut and supports QASM, G Hook and field replaceable buckles. The front flap located directly on the front of the APTUM™ Swimmer Plate Carrier can secure a variety of different cummerbunds into place allowing the wearer to choose between quick release cummerbund options to traditional Velcro cummerbund options. A Kangaroo Pouch can also be located on the front of the APTUM™ Swimmer Plate Carrier that supports up to three AR magazines as well as an ID Velcro loop field for moral pouches or attaching a smart phone case.

The shoulder straps on the APTUM™ Swimmer Plate Carrier also include laser cut GRID providing the wearer with routing for communication devices or hydration bladders. Located on the inside of the Beez Combat Systems APTUM™ Swimmer Plate Carrier are vertical 10″ loops for attachment of plate carrier pads. The APTUM™ Swimmer Plate Carrier is entirely manufactured in the United States, meets MIL-Spec thread and Velcro requirements and is constructed from 500 denier Cordura/GRID.

Padded Harness GRID
Written by Beez
December 17, 2020 – 10:07 pm

Comments Off on Padded Harness GRID

The Beez Combat Systems Chest Rig Padded Harness GRID was designed to increase the wearer’s ability to carry additional essential items. The Padded Harness GRID is completely laser cut and is equipped with a laser cut GRID throughout the back of the Padded Harness GRID and on the padded shoulder straps as well. The padded shoulder straps and rear padded harness increase comfort for the wearer especially when increasing the load bearing weight. The Beez Combat Systems Padded Harness GRID is completely customizable allowing the wearer to virtually mount any MOLLE compatible pouches throughout the back or the shoulder straps. 
Some of the most common pouches attached to the Beez Combat Systems Padded Harness GRID are the Beez Combat Systems Hydration Backpack Short via GRIDLOK attachment technology. Another common pouch to be mounted on the Padded Harness GRID is any of the Beez Combat Systems GRIDLOK Radio Pouches if operating a mission in which communications are fixed. Finally another common pouch attached to the Padded Harness GRID is the Beez Combat Systems GRIDLOK TQ II Pouch directly onto the shoulder. This allows easy access for the wearer to acquire the tourniquet located inside the GRIDLOK TQ II Pouch as well as the trauma shears located on the pouch also. 
The Beez Combat Systems Padded Harness GRID has also been stress tested while in the field under live fire conditions. This stress test can be viewed by clicking the YouTube video hyperlink. The stress test included a drag handle pull also while under live fire conditions. This test demonstrated that the drag handle located on the Padded Harness GRID is in fact reinforced and durable enough to operate under extreme conditions. The Beez Combat Systems Padded Harness GRID is manufactured in the United States and meets MIL-Spec thread and Velcro requirements. 

Chest Rig MOLLE Belt (CRMB) GRID
Written by Beez
December 17, 2020 – 9:28 pm

Comments Off on Chest Rig MOLLE Belt (CRMB) GRID

The Beez Combat Systems Chest Rig MOLLE Belt (CRMB) GRID was designed to provide the wearer with additional real estate when operating with a Beez Combat Systems chest rig. The Chest Rig MOLLE Belt (CRMB) GRID attaches via one inch buckles to any Beez Combat Systems AK Chest Rig, AR Chest Rig, PCC Chest Rig and the recently released SIDEWING. The Beez Combat Systems CRMB GRID is completely laser cut allowing the operator increased load bearing strength while simultaneously reducing the overall weight of this piece of equipment itself. The laser cut GRID consists of three rows by six columns and is MOLLE compatible. This allows virtually any pouch to be comfortably mounted onto the CRMB GRID.


Some of the most common pouches that are mounted onto the Beez Combat Systems CRMB GRID are the Beez Combat Systems GRIDLOK Folding Dump Pouch, the GRIDLOK IFAK Pouch as well as even the GRIDLOK Handcuff Pouch. The GRIDLOK Folding Dump Pouch allows the wearer to stash empty magazines which helps suppress continued fire saving time between reloads. The GRIDLOK IFAK Pouch is a great piece of equipment to mount to the CRMB GRID because this allows quick easy access to essential medical supplies when working with teams. As well as the GRIDLOK Handcuff Pouch is a great piece of equipment to have on the Beez Combat Systems CRMB GRID especially for law enforcement and military personnel such as Security Police and Military Police.


The Beez Combat Systems CRMB GRID is padded providing the wearer with enhanced comfort and stability while out in the field. The CRMB GRID can be adjusted to accommodate most waist sizes and conforms easily to the waist via closed cell foam. The CRMB GRID is manufactured in the United States and meets MIL-Spec thread and Velcro requirements. The CRMB GRID is made from 500 denier Cordura and the laser cut GRID allows for a wide variety of color options made available not limited to Multicam, Multicam Black and even M81 Woodland.


The Beez Combat Systems Chest Rig MOLLE Belt CRMB GRID was even featured on Survival Life for its durability and increased real estate for the wearer when operating with a chest rig. Combined with the Beez Combat Systems Padded Harness the wearer of any Beez Combat Systems Chest Rig GRID has increased their ability to carry additional load bearing essentials necessary for the mission at hand.

IMPCT Juggernaut Case – APTUM™ Plate Carriers
Written by Beez
December 17, 2020 – 6:19 pm

Comments Off on IMPCT Juggernaut Case – APTUM™ Plate Carriers

The Beez Combat Systems APTUM™ Plate Carriers are designed to comfortably accommodate the MOLLE/PALS mounts to the IMPCT Juggernaut Cases. This includes the Beez Combat Systems APTUM™ SAPI/SHOOTER plate carrier and the APTUM™ SWIMMER plate carrier. The intended location of the IMPCT Juggernaut Cases is ideally on the front of the carrier placed squarely on the chest so that the wearer has easy access to the electronics at hand however, the versatility of the APTUM™ Plate Carriers by Beez Combat Systems allows the wearer to place their IMPCT Juggernaut Case anywhere they choose.


The Beez Combat Systems APTUM™ Plate Carriers are completely laser cut and are manufactured entirely in the United States. The APTUM™ Plate Carriers were designed to allow the wearer to configure their load out for multifaceted operations ranging from low profile/zero visibility to situations involving high threat engagement. Like other popular plate carriers found on the market the Beez Combat Systems APTUM™ Plate Carrier can accommodate a wide variety of load outs utilizing the Beez Combat Systems GRIDLOK attachment technology system. The Beez Combat Systems GRIDLOK attachment technology is laser cut allowing for easy attachment of any Juggernaut Case.


Once attached the IMPCT Juggernaut Case rests firmly on the front of the APTUM™ Plate Carrier. On both sides of the IMPCT Juggernaut Case the APTUM™ Plate Carrier provides the wearer with additional laser cut points specifically designed for comms/data/PTT and cable management. This allows the wearer to maintain their signature management while still maintaining ease of access to important equipment while out in the field.

GRIDLOK Admin Pouch
Written by Beez
December 17, 2020 – 1:46 am

Comments Off on GRIDLOK Admin Pouch

The Beez Combat Systems GRIDLOK Admin Pouch is designed to support a wide variety of items from maps, notepads, weatherproof writing utensils and of course important mission information. The GRIDLOK Admin Pouch is an ideal important piece of equipment for professionals in the field to maintain access to imperative mission intelligence pertaining to high value targets and necessities for navigating the terrain.  The Beez Combat Systems GRIDLOK Admin Pouch is sized at 7″ H x 4.5″ W. The GRIDLOK Admin Pouch can hold several items at one time making this piece of equipment useful especially among law enforcement personnel and military units. The front face of the GRIDLOK Admin Pouch includes a Velcro ID field for important information such as bloody type patches, allergy patches and team or moral patches.


The Beez Combat Systems GRIDLOK Admin Pouch secures the contents within the pouch via a strong two inch Velcro flap. The Velcro flap also helps the wearer facilitate access to the contents within the GRIDLOK Admin Pouch whether standing, crouched or in a prone position. The GRIDLOK Admin Pouch is entirely laser cut and meets MIL-Spec thread and Velcro expectations. The Beez Combat Systems GRIDLOK Admin Pouch is also Berry Compliant with an MSRP starting at $23.99 depending on color of material chosen.


The Beez Combat Systems GRIDLOK Admin Pouch mounts vertically and comes equipped with laser cut GRIDLOK attachment technology. The GRIDLOK attachment technology works well with any Beez Combat Systems chest rig or plate carrier with laser cut GRID as well as the GRIDLOK attachment technology is MOLLE compatible with any other manufacturers tactical gear.  The Beez Combat Systems GRIDLOK Admin Pouch is available in a wide variety of colors not limited to Multicam, Multicam Black and even traditional M81 Woodland.

GRIDLOK IFAK Pouch
Written by Beez
December 16, 2020 – 2:33 am

Comments Off on GRIDLOK IFAK Pouch

The Beez Combat Systems GRIDLOK IFAK Pouch is sized at 5″ H x 6″ W and is designed to secure the contents needed for an individual first aid kit (IFAK) as well as even a tourniquet. Located at the base of the GRIDLOK IFAK pouch is an elastic retention band that is designed to secure one CAT (Combat Application Tourniquet) tourniquet up to Gen7 by North American Rescue or one RATS tourniquet. The Beez Combat Systems GRIDLOK IFAK Pouch is completely laser cut and is equipped with laser cut GRIDLOK attachment technology. This allows the wearer to attach the GRIDLOK IFAK pouch to any MOLLE compatible piece of equipment.

Located on the front face of the GRIDLOK IFAK pouch is a Velcro ID field allowing the wearer to attach important information such as blood type patches and drug allergy patches. Also on the front face of the GRIDLOK IFAK pouch is a laser cut color signature. This allows the operator to switch between red, black or multicam for various field operations. Red, black and multicam color signature options come available with the Beez Combat Systems GRIDLOK IFAK Pouch however, reflective, GITD and IR color signatures can also be utilized in the GRIDLOK IFAK pouch.

The Beez Combat Systems GRIDLOK IFAK Pouch is manufactured in the United States and consists of MIL-Spec thread and Velcro and is Berry Compliant. The GRIDLOK IFAK pouch is also available in a wide variety of colors not limited to Multicam, Multicam Black and traditional M81 Woodland.

 

GRIDLOK Flash Bang/OC Pouch
Written by Beez
December 15, 2020 – 10:14 pm

Comments Off on GRIDLOK Flash Bang/OC Pouch

The Beez Combat Systems GRIDLOK Flash Bang/OC Pouch comfortably secures both the MK3 and the MK4 style canisters via a closed top design. This makes the GRIDLOK Flash Bang/OC Pouch an important piece of equipment for law enforcement departments that deal with high risk scenarios throughout the United States. The GRIDLOK Flash Bang/OC Pouch is attached using GRIDLOK attachment technology designed by Beez Combat Systems. The GRIDLOK attachment technology is MOLLE compatible allowing the pouch to be attached to combat and tactical gear produced by other manufacturers. 

The closed top flap serves three important uses: The first is the flap acts a primary way to secure the MK3 and/or the MK4 style canisters into the pouch. Second, the flap provides additional signature management by means of covering any coloring or print that can be found on both MK3 and MK4 style canisters. Finally the flap located at the top of the GRIDLOK Flash Bang/OC Pouch assists the wearer to facilitate access to both the MK3 and the MK4 style canisters.

The Beez Combat Systems GRIDLOK Flash Bang/OC Pouch is made entirely laser cut, mounts vertically and holds exactly one MK3 or MK4 style canister. The GRIDLOK Flash Bang/OC Pouch contains drain holes located at the bottom of the pouch as well as the pouch also includes a woven elastic retention band.

The GRIDLOK Flash Bang/OC Pouch is available in a wide variety of colors not limited to Multicam, Multicam Black and even traditional M81 Woodland. The pouch is an important piece of equipment to have for both military and law enforcement departments and is manufactured in the United States. The Beez Combat Systems GRIDLOK Flash Bang/OC Pouch is MIL-Spec thread and Velcro and is Berry Compliant.

SIDEWING – Spiritus Systems/Haley Strategic/RDR Gear
Written by Beez
December 13, 2020 – 6:32 pm

Comments Off on SIDEWING – Spiritus Systems/Haley Strategic/RDR Gear

SIDEWING S2/S3 (Spiritus Systems) 

The Beez Combat Systems SIDEWING S2/S3 was designed to convert the Spiritus Systems Micro Fight Chest Rig MK/4 clones into a larger chest rig allowing the wearer additional real estate for load bearing essentials. The SIDEWING S2 is equipped with two laser cut columns and the SIDEWING S3 comes equipped with three laser cut columns for increased real estate. The SIDEWING S2 and S3 include a top lock-down flap which secures the SIDEWING into place. The Beez Combat Systems SIDEWING S2 and S3 include laser cut GRID allowing the wearer to attach essential items such as a tourniquet pouch, radio pouch and additional magazine pouches to the front face of the chest rig. The SIDEWING S2 and S3 can also be equipped with the Beez Combat Systems Chest Rig MOLLE Belt (CRMB). 
SIDEWING H2/H3 (Haley Strategic) 
The Beez Combat Systems SIDEWING H2/H3 was designed to convert the Haley Strategic D3CRM MICRO into a larger chest rig allowing the wearer additional real estate for important load bearing essentials. Similar to the SIDEWING S2 and S3 the Beez Combat Systems SIDEWING H2 includes two laser cut columns and the SIDEWING H3 includes three laser cut columns. A top lock-down flap is located at the top of the chest rig in order to secure the rig into place. This prevents unnecessary obstructions whether the wearer is standing, crouching or in a prone position. The SIDEWING H2 has a total width of 20″ and the SIDWING H3 has a total width of 23″ allowing the wearer to maintain a low profile loadout.
SIDEWING R2 (RDR Gear)
The Beez Combat Systems SIDEWING R2 allows the wearer to convert their RDR Modular Chest Pack (MCP) into a larger chest rig increasing the amount of space for real estate and load bearing essentials. The SIDEWING R2 is equipped with two laser cut columns and a top lock-down flap which secures the SIDEWING R2 into place. The SIDEWING R3 includes three laser cut columns, a top lock-down flap and has a total width of 23″ allowing the wearer to maintain a low profile signature.
The Beez Combat Systems SIDEWING chest rigs are all laser cut and include MIL-Spec thread and Velcro. Each SIDEWING is Berry Compliant and proudly manufactured in the United States. The Beez Combat Systems SIDEWING chest rigs are equipped with GRID laser cut attachment technology allowing the wearer to utilize the Beez Combat Systems GRIDLOK pouch line. The Beez Combat Systems SIDEWING chest rigs are available in a variety of colors not limited to Multicam, Multicam Black and even M81 Woodland pattern. The SIDEWING S2, S3, H2, H3, R2 and R3 can be upgraded to include the Beez Combat Systems Chest Rig MOLLE Belt (CRMB) and the Beez Combat Systems Chest Rig Padded Harness.

GRIDLOK open/closed Handgun Pouches
Written by Beez
December 11, 2020 – 1:56 am

Comments Off on GRIDLOK open/closed Handgun Pouches

The Beez Combat Systems GRIDLOK Handgun Pouch can hold a single magazine belonging to any 9mm, .40 and .45 caliber handguns. The Beez Combat Systems GRIDLOK Handgun Pouches are all 100 percent laser cut and come equipped with laser cut GRIDLOK attachment technology (MOLLE compatible). The GRIDLOK Handgun Pouches include drain holes located at the bottom of the pouch and each pouch mounts vertically. The GRIDLOK Handgun Pouches come in both closed top and open top options as well as GRIDLOK extended magazine pouches are also available for larger capacity magazines and magazines that function with pistol caliber carbines (PCC).

The closed top GRIDLOK handgun pouches differ from the open top GRIDLOK handgun pouches as the flap on the closed top pouches serve three functions: The first is that the flap secures the magazine into place via Velcro located on the forward face of the pouch. Second, the flap assists with signature management when operating in terrain where camouflage is necessary. Finally, the front flap on the GRIDLOK handgun pouches acts as a pull tab allowing the wearer easier access if operating under high stress conditions.

The open top GRIDLOK handgun pouches provide the wearer with a bungee retention to secure the magazine into the pouch while operating in the field. The open top GRIDLOK handgun pouches also allow the wearer with quicker ease of access especially if the open top GRIDLOK handgun pouches are working in conjunction with Beez Combat Systems open top GRIDLOK rifle pouches. The open top GRIDLOK handgun pouches work especially well with the Beez Combat Systems APTUM™ Front Flap G HOOK 3 Cell Elastic TQ or the Beez Combat Systems APTUM™ Front Flap Buckle 3 Cell Elastic TQ.

The Beez Combat Systems GRIDLOK Handgun Pouches are manufactured in the United States and are Berry Compliant. The GRIDLOK Handgun Pouches are also available in a wide variety of colors not limited to law enforcement, military personnel or the responsible citizen.